Hi everyone, today I am going to introduce to you a couple of our patent products which you can only find in hygger stores.
First of all, I’d like to introduce to you our best seller on Amazon — hygger aquarium gravel cleaner. It is a pretty cool air-pressing button fish tank cleaner kit. It is going to take you just 30 secs to assemble it and then all you need to do is to press the button for 7 times before the inside tube is full of water, and then the water will flow out automatically by itself.
This motor-free aquarium gravel cleaner serves for 3 purposes:
- Dirt suction
- Sand washing
- Water change
Aquarium Vacuum Gravel Cleaner is suitable for various types of fish tanks, with spliced extension tubes, two-stage splicing combination, both large and small tanks are suitable, and extension tube can be installed according to demand.
Second, I am going to introduce to you a newly launched products — hygger 3 in 1 Aquarium Filter Water Changer.
1. Water filter
When you fit this fish tank to you 0.15- 0.28 inch fish tank, it can be used as a daily filter to pour out clean water. The water will enter from the side and then filtered by dense cotton, active carbon and sponge. Then the water flows out through front outlet or rotatable outlet tap. I have personally witnessed how effective it is when it comes to filter the aquarium water overnight.
2. Water changer
One thing most of the filter cannot achieve is to change water. Our Innovative water exchange design allows for quick and easy water changes. Rotate the outlet tap to change the water out of the tank by the included hose(47.2in). But only part of the water can be changed. hygger fish tank filter meets the scientific fish keeping, all the water will not be pumped away, allowing the fish to adapt.
3. Landscaping & Oxygenation
When a foutain plug is plugged into the outlet tap, the aquarium filter will achieve an effect similar to a small fountain ball. The flow of water will also increase dissolved oxygen in the aquarium.
Third, I am going to introduce to you the first anthurium light with display screen in the market!
If you are a fan of programming things, this is the light you should be choosing! However, if you do not want to program the light, all you need to do is to set the local time and let the programmable LED light run its automatically 24 hours’ cycle in which the modes of sunrise, daylight, sunset and night are all included!
The light will automatically on at 630 am and turn itself off at 1130 pm. There is a very sweet function of ramp- up and ramp-down meaning the light will be on and off in a 15 minutes duration. This is also going to make sure that your skittish fish will not be scared due to the sudden change of lighting.
During the daytime, you will enjoy the full spectrum lighting. At night, you could choose from any of those 6 colors: dark blue, green, purple, cyan, yellow, red.
You could also change the brightness of the light from 10% to 100% in default mode. Brightness is one of the most important factor which you need to put into consideration when comes to buying LED lights. When you first moved the aquarium plants to a new fish tank, they are so scared that they tend not to grow. In this case, you could change the brightness into 20% and wait until the plants settles down to make the light brighter.
For DIY mode, you are going to have 8 time slots to choose from. You could decide how long does each of the 8 time slots last. You could make the time period last for 2 hours, 8 hours or 12 hours, etc. During that 12 hours, you could change the brightness into 0, yes, you could change the brightness into 0 in DIY mode to let your fish and plant have a good night’s sleep!
Please leave your comment and let us know what other user-friendly packages you would want us to introduce.