Hygger LED Aquarium Light 72W(48"-55")
Please click the “Get Coupon” button to get the discount first.
Easily Programmable with built-in LCD monitor: LCD monitor has two channels that allow for independent control that simulates sunrise and sunset. Ultra-bright: Strong LEDS provide incredible brightness for a better viewing experience.
Adjustable light color and brightness: Hygger LED light brightness has ten levels of brightness and seven different colors, making it suitable for different light requirements and a wide variety of applications.
Adjustable timer: Light On/Off is adjustable using the integrated LCD Display
Non-flash LEDS: The high-quality LEDS provide stable, consistent lighting.
Energy-Efficient: High color rendering index and lighting effects save energy and using a DC adapter to provide safer and more efficient power. Extendable bracket: Extendable bracket allows the light to fit a wide range of aquariums.
Memory function: In case of power loss, the lighting program is saved.
Suitable for planted and freshwater aquariums: This LED light provides full spectrum necessary for keeping and growing healthy aquatic plants.
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.Read and follow all important notices on the appliance before using. Failure to do so may result in loss offish life or damage to this appliance.
2. Danger-To avoid possible electric shock, special care should be taken, since water is a constant in the use of aquarium equipment. For each of the following situations, do not attempt repairs yourself. Return the appliance to an authorized service facility for service or discard the appliance.
A: Carefully examine the appliance after installation. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning POWER CORD or it is dropped or damaged in any manner. The power cord of this appliance cannot be replaced. If the cord is damaged, the appliance should be discarded. Never cut the cord!
B: To avoid the possibility of an electrical hazard, aquariums should be placed to one side of a wall mounted outlet to prevent water from
dripping onto the outlet or plug. A udrip loop”” (see illustration) should be arranged by the user for the cord connecting light to a power outlet.
The drip loop is the part of the cord below the level of the outlet, or the connector if an extension cord is used, to prevent water travelling
along the cord and coming in contact with the power outlet. If the plug or outlet does get wet, do not unplug the cord. Disconnect the fuse DRIP L00P or circuit breaker that supplies power to the light. Then, unplug and examine for presence of water in outlet.
3.This appliance is not intended for use by persons (including children) with significantly impaired physical or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible fortheir safety. Children should always be supervised to ensure that they do not play with the appliance.
4.To avoid injury, do not touch moving or hot parts.
5.CAUTION-Always unplug or disconnect all appliances in the aquarium from power supply before placing hands in water, before putting on or taking off parts, and while the equipment is being installed, maintained or handled. Never yank the cord to pull plug from the outlet. Grasp the plug and pull firmly to disconnect. Always unplug the light from an outlet when not in use.
6.Do not install or store the appliance where it will be exposed to weather or temperatures below freezing. For indoor household use only. Do not iimmerse.
7.Make sure the appliance is mounted correctly and securely positioned on the aquarium before operating.
8. If an extension cord is necessary, a cord with proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled. The connection should be carried out by a qualified electrical installer.
9.The outlet should be installed near the equipment and be easily accessible.
10.This light can be mounted on any aquarium with glass thickness more than 3mm. The mounting legs help prevent the light from slipping into the aquarium by
accident during maintenance. To avoid possible electrical shock, do not immerse the light in water. If the light falls into the water, or otherwise becomes wet, do not touch it until you have unplugged it.
1x Led Light
1x AC-DC adaptor
2x Metal brackets
1x User manual