Powerful sand-washing function
This fish tank cleaner with a 9.85 feet super high head and the water changer pump can provide a strong flow of up to 396 GPH. So the power of the sand washer is sufficient to quickly change the water, saving half the time compared to a manual. In addition, the accessory has been upgraded with a filter sponge inside, which can block the gravel sand from entering the motor pump to cause blockage.
All-around cleaning function
hygger fish tank gravel cleaner has four spliced rigid tubes which can be extended from 11.4 inches to 40.5 inches as necessary. Each corner of the fish tank can be cleaned with brush heads. This gravel cleaner can also be used with the duckbill suction port to suck dirt from the corner of the tank. Thus, the dung can be easily sucked away.
Filtration and water change
You can directly drain clean water into the large tanks using filter housing. The filter material can be washed and used multiple times, and other filter materials can be replaced. The water directly flows out of the tank through a water pipe. It is suitable for filthy fish tanks. It can also change and add water. The starting water level can be as low as 2 inches and the pumping as low as 0.3 inches.
Safe to use
The electric tank cleaner is equipped with an external independent switch. The adapter is DC 12 V, and the power supply is UL certified. It can be used with confidence.
Directions for Use
It is very easy to assemble the cleaner. Just refer to the picture below.
Note: Recommended sand size is more significant than 0.2 inches and is caring for your small fish.
Power: 20 W
H-MAX: 9.85 feet
F-MAX: 396 GPH
Voltage: DC 12 V
Input Power: 100-240 V, 50/60 Hz
Total Line Length: 16.4 feet
1. Brush Head
Size: 3.9″ x 3.3″
Function: It can clean the dirt on the wall of the fish tank.
2. 45° Corner Suction Inlet
Size: 1.2″ x 1.2″
Function: Help you block the landscape sand in the fish tank when changing water.
3. Duckbill Suction Inlet (Debris vacuum)
Size: 2.2″ x 2″
Function: Clean up fish stools and residues at the bottom of the fish tank.
4. 360° Water Intake Strainer
Size: 1.6″ x 3.1″
Function: 360 ° water inlet, quicker water change.
5. Gravel Washer (Sand vacuum)
Size: 6.7″ x 1.6″
Function: Quickly clean sand and gravel.
6. Filter Housing
Size: 5.1″ x 2″ x 0.79″
Function: Filter impurities and feces in the water.
7. Spliced Extension Tube ×4
Size: 7 inches
Function: the length can be changed at will, suitable for various sizes of fish tanks.
8. Non-slip Handle
Size: 4.3 inches
Function: Anti-slip handles, easy to operate.