Constant and stable airflow
Hygger 5W aquarium air pump has 2 ports that pump out constant airflow to dissolve sufficient oxygen for your aquarium up to 4.5 feet deep. It can be used for tanks sized from 20 to 300 gallons.
Adjustable flow control
This fish air pump has built-in control knob that allows you to adjust the air flow to optimize the performance of your air pump drive equipment, appliance, or ornaments. (Please note: Air tubing is not included.)
Run two devices simultaneously
It can be running with 2 applications simultaneously so you never need to worry about your fish not getting sufficient air. It is designed to work for marine and freshwater.
Low noise level
ABS thick shell and sealed inner baffle greatly reduces noise, while the soft rubber foot pad can effectively cushion the vibration produced by the motor.
Low consumption and easy-to-use
The power needed is 5W. Just connect air pump to air tubing to air stones, protein skimmers or sponge filters, plug it and you’re ready to go.
Directions for Use
It is very easy to use this air pump. Just follow the steps below and refer to the picture attached.
Step 1: Connect air tubing to the pump.
Step 2: Install a check valve.
Step 3: Connect the tubing to air stones, ornaments, or other equipment.
Step 4: Put the pump in a fixed position.
Step 5: Plug it in and you are good to go!
Voltage (American): AC 100-120 V / 60 Hz
Voltage (Europe / Britain): AC 230 V / 50 Hz
Power: 5 W
Air Flow: 160 GPH
Sound: < 30 dB
Pressure: 0.02 MPa
Depth: 4.5 Feet
Cord Length: 6 Feet
Application: Up to 300 Gal