hygger Aquarium Bio Filter Media

HGH968.
1 customer review
5.00 out of 5 based on 1 customer rating

Biofilter perfect for large freshwater or saltwater aquarium tanks, fish koi ponds, hydroponics, aquaculture, and aquaponics.

 

Sold out

Package includes:

2.4 LBS bio media
7.9 LBS bio media

Description

Floating moving bed filling

This biofilter media is meant to be moving at all times by air or water current. It can be used indoors or outdoors. When used for aquarium sump tanks, you may need an air pump to put some air into the water to make the filter media move. It would be more efficient if there are microbubbles in the water.

Easy to use & Less maintenance

It’s very easy to use the biofilter media, just pour the media into the water of the sump tank. You wouldn’t have to clean it at all, just let the media stay where they are, then change the water regularly.

Get more surface area

A small cylinder’s inner space is divided into 5 equal parts. The inner and outer walls of the cylinder are filled with extrusive stripes which largely increase the surface area with water. It’s good for biofilm formation and the growth of beneficial bacteria. The K1 filter media is the most efficient in moving the media biofilter system for aquariums.

Wide filtration application

This filter media can be used for freshwater and marine aquariums, koi ponds, aquaponics, aquaculture, and hydroponics filtration. You can use this in places where water filtration is needed. The biofilm formation time is 15 – 30 days.

Directions for Use

1. When you use the biofilter for aquariums, please remember to add the biofilm filter K1 media to the filtration sump, not directly to the fish tank.
2. No need to make too much movement for the sump water, just use an air pump to put air into the water to make filter media move a little.
3. After putting the K1 filter media in use, there is no need to maintain or clean it. Just let it stay where they are.
4. To get a better filter effect, the maximum packing ratio of filler should be less than 70%.

Specifications

Brand: hygger
Unit dimension: 3 / 7″ x 4 / 15″ ( 10 x 7 mm)
Void ratio: > 85%
Density: 0.94 – 0.97 g / cm³
Packing numbers: > 990000 pcs / m³
Dosing ratio: 15% – 70 %
Material: HDPE
Life-span: > 10 years
Membrane forming: 5 – 15 days

2 weights available:
Weight 1: 2.4 lbs/pack, total QTY is about 6600.
Weight 2: 7.9 lbs /pack, total QTY is about 21600.

Additional information

Size

2.4LBS, 7.9LBS

1 review for hygger Aquarium Bio Filter Media

  1. Michael Sebar

    I purchased the new reef setup that came with this type of filter media. Until now, I couldn’t find it anywhere. It’s great and so convenient.

Add a review

Your email address will not be published. Required fields are marked *