Hygger Pinpoint IC Temp Controller Aquarium Heater will be your best choice!
Voltage: 110V-120V, 60HZ
Power cord length: 5.5 ft
Length - 8.7"", for 5~10 Gallons, 50 Watts
Length - 9.8"", for 10~25 Gallons, 100 Watts
Length - 10.7"", for 20~45 Gallons, 200 Watts
Please read instruction and caution carefully before use, and keep it away from children.
Do's & Don'ts
✖️ This titanium heater is not suitable for use in acrylic fish tank.
✖️ DO NOT use heater alone, to avoid overheating, it must be worked with thermostat and temperature detector. Keep heater and thermal detector fully submerged
✖️ We don't suggest to use this temperature controller for other brand heater for security reasons.
✖️ We do not recommend to use heater at sump tank, as it's water deepth is not high enough to fully submerged.
✖️ Do not burry heater under the dirt or sand, due to different specific heat capacity, it will damage heater.
✔️ Make sure heater placed horizontally and fully submerged as well as the thermal detector when it's on duty.
✔️ We recommend to install a water pump or wave pump to circulate water movement so that the whole aquarium area at the same temperature.
✔️ As thermostat is not waterproof, please keep it away from aquarium. Stay dry.
✔️ If you want to clean the fish tank or take out the heater, please disconnect power and wait for 30 MINUTES to cool down.
✔️ This heater is only suitable for indoor use.
1* Submersible Aquarium Heater
1* Thermostat with Detector
2* Suction Cups
1* User Manual
***Internaitonal customer beware of the local voltage. Any voltage over 120V will burn out the controller and heater without transformer.
Add：Bantian Group Business Central，Longgang District, Shenzhen City，Guangdong Province，China