· 【Increases Aquarium Water Movement】-- Hygger Wavemaker Pump simulates a natural currents of the ocean to create similar water environment to fish and other habitants, giving your fish an opportunity to exercise and feel as if they are in a real river or ocean. In addition, this pump can be used to increase the oxygen level of the water if you add more fish.
· 【Keeps Water Clean】 -- It also helps to stir up the debris, clean up dead spot of the fish tank in conjunction with filter. Saves your tons of energy for cleaning fish tank.
· 【Impressive Flow Rate】 -- 16W, 2000 gph submersible powerhead is strong enough for tanks from 75 gallons to 130 gallons, it can be used in marine, freshwater, and tropical aquariums. Fully submerible and oil free.
·【360-Degree Rotation】 -- Turning two ball joints, it rotates a full 360 degrees so you can get full flow direction and create a natural water motion.
· 【Easy Installation】-- Build in locking suction cup, mount in anywhere in your tank and angle the pump to tune the water flow. Plug it and and get the flow going right away.
Hygger offers high quality Aquarium supplies from air pump, wavemaker, heater, led light, cleaner to decorations! You can find all the aquarium accessories here.
16 Watt Strong Current Flow Circulation Pump
Hygger makes a fully submersible powerhead that cycles 2000 gph. It creates powerful, strong water current flower for large aqarium range from 75 gallon to 130 gallon fish tank. It greatly helps plants, corals, beneficial bacteria, and even your fish to thrive. Aquarium circulation pump is suitable for marine, tropical and freshwater setups.
· How the circulation pump work?
· Simulates a natural currents of the ocean to create similar water environment by continuously circulating water
· Stir up the debris, clean up dead spot of the fish tank in conjunction with filter.
· Dissolve more oxygen in the water
· Power: 16W
· Q/Max: 8000 L/P
· Voltage: 110v-120v/ 60Hz
· Dimensions: 5.1" X 2.8" X 9.3" (130mm*70*235mm)
· Cord length: 9.1 ft /2.8m
· Capacity: 75 gallon to 130 gallon aquarium
· Anticorrosion titanium impellers constructed, it can be used at saltwater aquarium as well as fres water.
· Rubber end ensures less noise reduction, keeps it quiet while running.
Submersible & Oil Free Motor
· It is fully submersible and oil free so it won't polluting the living environment of the fish
· You can turn sphere joints in any postion so you’re able to really fine tune the water flow.
· Magnet suction cup support allows for free positioning
What to do if is not working?
It happens when the impeller out of the track. As two impellers stand loosely at the base, after long time using or impact, it will out of the track and cause deactivation.
It is easy to solve this problem.
Shut the power off before beginning. Take the pump apart and take out impellers and put them into the base again. Assemble the case.
Plug it and on the go. Try one more time if still not working.
How to install?
Follow the instructions below:
1. Clean the glass where you will place the suction cup
2. Find a good spot and attach the locking mechanism
3. Plug in power and you are good to go
The powerhead should be fully submerged. Otherwise, working pump comes out water surface and make lots of noise.
Add：Bantian Group Business Central，Longgang District, Shenzhen City，Guangdong Province，China